Phrozen Aqua Ivory 4K 3D Printer Resin - 1kg

Phrozen Aqua 4k 3D Printing Resin - 1Kg

Resin (for 3D printing purposes) is a photopolymer fluid material engineered to cure under a light source via vat polymerization technology (resin 3D printers). 3D Printer resins are available for SLA Laser 3D printing, LCD/MSLA 3D printing, and DLP 3D printing. There is a wide variety of resin materials that provide high-quality and highly detailed, smooth results. 3D printer resins are available for various applications and functionality and consist of materials, like high-temperature resins, castable resins, and even flexible 3D printer resins. This resin will work well for various printer brands like Elegoo Mars, Phrozen, Creality, Peopoly Phenom, and more.

• Use and preserve resins at room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.

Aqua-Gray 4K

• Density: 1.1 g / cm3
• Viscosity: 150 cps
• Tensile Strength (Break): 2 Mpa
• Elongation: 7 %
• I-ZOD Impact Strength: 6.78 KJ/m2
• Surface Hardness, Shore D: 77 Shore D
• Water Contact Angle: 35 degree

Aqua-Ivory 4K

• Density: 1.1 g / cm3
• Viscosity: 221 cps
• Tensile Strength (Break): 1.9 Mpa
• Elongation: 6 %
• I-ZOD Impact Strength: 6.42 KJ/m2
• Surface Hardness, Shore D: 75 Shore D