Phrozen Beige-Flex 3D Printing Resin - 500 gm
Phrozen Beige-Flex Resin - 500 gm
As part of our standard resin collection, Phrozen’s Beige-Flex Resin has been specially designed for prototyping purposes. With its light color, this resin is also ideal for painting after the curing process.
500 gm Pack.
Phrozen Beige-Flex Resin - 500 gm
- Viscosity: 545 cps (25C)
- Density: 1.19 g / cm3
- Tensile Stress (Break): 40 MPa
- Elongation: 50-60 %
- Tensile Modulus: 192 MPa
- Hardness: Shore 65D
- Heat Deflection Temperature @0.45MPa: 100C
- Weight: 500g per bottle
- XY Resolution: 0.047 mm
- Layer Height / Parameter: 10 sec @ 50 um, Delay 3
- Ways to Rinse: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
- Compatible Printer: Phrozen 3D Printer Series
- Application: Prototyping
- Avoid sun light exposure.
- After printing, stored used resin in closed and opaque bottle.
- DO NOT mix used resin with new resin.
- Shake or stir resin properly to avoid pigment separation.
- DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.
- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
- DO NOT swallow resin. Go to hospital if you do.
- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
- Resin might cause slight skin irritation. Stop using it if allergy occurred.
- Resin smells. We strongly suggest you to use it under ventilated condition.
- Keep resin in room temperature(15 - 35 Celsius) and dry condition.
- Keep resin away from kids.
We deliver worldwide.
1. The best way to find out the total cost of the goods and shipping; is to add the products you wish to order, to the cart.
2. Then click on Checkout button.
3. On the checkout page feed in your shipping address.
4. Total cost of Goods and Shipping will appear on the right pane. (please be patient it may take a few moments for it to give the shipping options and cost)