India en USD
  •  
     
:

Clear
Clear
Reset all filters
Phrozen Nylon-Green Tough Resin - 1 Kg
        • Phrozen Nylon-Green Tough Resin - 1 Kg
        • Phrozen Nylon-Green Tough Resin - 1 Kg
        • Phrozen Nylon-Green Tough Resin - 1 Kg
        • Phrozen Nylon-Green Tough Resin - 1 Kg

        Phrozen Nylon-Green Tough Resin - 1 Kg

        SKU: Nylon-Green Tough

        Phrozen Nylon-Green Tough Resin - 1 Kg

        Phrozen Nylon-Green Tough Resin – For Functional & Durable 3D Printing

        Unlock the full potential of 3D printing with Phrozen Nylon-Green Tough Resin, specially formulated for functional, load-bearing parts and prototypes. This advanced resin offers a rare combination of high toughness, stretchability, and impact resistance, allowing you to print components that can withstand stress and real-world use.

        Key Highlights & Benefits

        FeatureDescription & Benefit
        High Toughness & Impact ResistanceDesigned to resist cracking, dents, or breaking under stress. Ideal for mechanical or wearable parts.
        Stretchable & Flexible BehaviorOffers a degree of flexibility without failure, bridging the gap between rigid and elastomeric resins.
        Excellent Prototyping CapabilityUse it to produce functional prototypes, small batch parts, or demanding models that undergo handling.
        One-Kilogram Variant AvailableThe product is available in a 1 kg size (Translucent Green) for sufficient usage in studio or lab environments.
        Wide CompatibilitySuited for most resin (SLA / MSLA / DLP) 3D printers capable of handling engineering resins.


        Phrozen’s Nylon-Green Tough Resins are stretchable, withstanding high pressures up to 19 MPa, and do not break easily. These resins are specifically made for prototyping and creating functional resin pieces.  

        Ask a question (0)
        Not rated yet
        0
        Buy more for less:
        1itemsUS$105/ each 
        2or more itemsUS$54/ eachsave48.57%
          • 27% off
          US$105
        • US$76.65
         
        Only 3 left in stock

        Phrozen Nylon-Green Tough Resin - 1 Kg

        Why Choose This Resin Over Standard Options?

        Standard “rigid” resins often fail under repeated stress, while elastomeric resins may lack dimensional stability. Phrozen Nylon-Green Tough Resin sits in an optimal middle ground: strong, yet with enough give to resist fracture. Use it when your design requires parts that must hold shape but also endure bending, impact, or mechanical loads.

        Whether for robotics, fixtures, functional prototypes, or stress-bearing parts, it’s engineered to expand your 3D printing capabilities beyond decorative models.

        Call to Action

        Order your Phrozen Nylon-Green Tough Resin (1 kg, Translucent Green) today and take your 3D printing from “just visual” to fully functional and durable.
         Check compatibility with your printer and follow safety guidelines to get the best performance.


        Technical & Usage Information

        • Color / Appearance: Translucent Green
        • Form Factor: Liquid photopolymer resin
        • Intended Use: Functional parts, small production runs, mechanical assemblies, stress-tested models
        • Precautions:
             • Store at room temperature, in a dark, ventilated container
             • Use with proper PPE: gloves, masks, safety glasses
             • Do not mix used resin with fresh resin
             • After printing, fully cure and dispose of waste in accordance with local regulations


        1. Viscosity: 742 cps
        2. Proportion: 1.1
        3. Tg: 73 °C
        4. Elongation: 130%
        5. Break Value: 19 MPa
        6. Hardness: Shore 68 D
        7. I-Zod Impact: 23.79 KJ/m2
        8. Weight: 1KG per bottle
        9. XY Resolution: 0.047 mm
        10. Layer Height / Parameter: 10 sec @ 50 um, Delay 3
        11. Ways to Rinse: Use alcohol spray to clean models and dry it by an air gun. Do not immerse printed part into alcohol over 30 sec.
        12. Compatible Printer: Phrozen 3D Printer Series
        13. Application: Prototyping
        • DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.
        • Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
        • Resin might cause slight skin irritation. Stop using it if allergy occurred.
        • Resin smells. We strongly suggest you use it under ventilated conditions.
        • Keep resin away from kids.
          • SKU
            Nylon-Green Tough
          • Weight
            2 lbs
          • Dimensions (L x W x H)
            11 x 11 x 15 in

        Product questions

        Please to ask a question.
        No questions yet. Be the first to ask the question!

        We deliver worldwide. 

        1. The best way to find out the total cost of the goods and shipping; is to add the products you wish to order, to the cart.

        2. Then click on Checkout button.

        3. On the checkout page feed in your shipping address.

        4. Total cost of Goods and Shipping will appear on the right pane. (please be patient it may take a few moments for it to give the shipping options and cost)